What this shear brings to your job
Works with most excavators
This shear fits excavators from 6 up to 30 tons. You can bolt it onto the machine you already own, no major rebuilds needed. It works great for scrap yards and demolition sites of all sizes.
Only needs one hydraulic line
This is where it stands out. It runs on a single hydraulic circuit. Lots of older excavators only have one auxiliary line set up for a breaker, with no extra lines for rotating attachments. Hook it straight to your existing breaker piping, and you can start cutting quickly. No expensive hydraulic modifications.
Huge cutting power
The HM10 model delivers up to 2,972 kN of thrust, which is almost 300 tons of focused cutting pressure. It slices through thick steel plate, angle iron and I-beams easily. The steel gets cut clean, not bent or crushed — this keeps scrap material in good shape for recycling.
4-way reversible blades to cut your running cost
We fit heat-treated high-alloy blade blocks. All four edges on each block can be used for cutting. Once one edge wears down, you just flip the block 90 degrees and keep working. You get way more life out of each blade, and you spend less money buying replacements.
Heavy NM400/500 wear plate build
The jaw and all load-bearing sections are built from NM400 and NM500 wear-resistant plate. Run it hard day after day, and it won’t twist or deform easily. It’s made to hold up under the rough, nonstop work scrap yards deal with.
Adjustable blade gap, less re-cutting
One practical benefit you’ll notice fast: you can fine-tune the gap between blades. This lets you hit your target size accurately, matching your required specs. Less rework means you waste less time going back over the same material.
Handles many different jobs
You can use it for bulk scrap cutting at recycling yards, tearing down steel-framed workshops, chopping old pipe piles, and sizing scrap down to the right length for melting. One attachment covers multiple jobs, perfect for demolition crews and scrap operators.
Safety built into the design
No one wants an accident to shut down the whole yard. We added safety features to lower risks while cutting. Fewer incidents mean less unexpected downtime for your business.
Simple for your operators to learn
You don’t need weeks of training to get your crew running this shear. New or experienced operators can pick it up quickly, and it slots smoothly into your regular workflow.
Supports metal recycling
Clean, precise cuts make sorting and processing scrap metal much simpler. Better cutting helps metals get reused, cuts down waste and fits modern recycling standards.
Wrap-up
This single-cylinder scrap metal shear is a solid, high-performance tool for on-site steel cutting. It mounts to your existing excavator, packs strong cutting force, and is built tough to last. The adjustable blade gap helps you get the size right the first time, saving you time and labour.
Recyclers and demolition contractors looking to step up their cutting work will get reliable performance out of this shear. It holds its own on scrap yards and demo sites, and it’s a worthwhile add-on to your equipment line-up.
Frequently Asked Questions
Q: Can I fit this shear to my old excavator that only has one auxiliary hydraulic line?
A: Absolutely. It’s designed exactly for single-circuit machines, connects to your breaker lines, no extra valves or hose work needed.
Q: How do the four-sided blades work?
A: Rotate the blade block when one edge wears out. Each block has four usable cutting edges so you buy replacements less often.
Q: Can I adjust the blade gap?
A: Yes, the blade gap is adjustable. You can dial it in for precise cuts and reduce rework.
Post time: Nov-12-2026
